Home
 

Easycap USB 2.0 is a Cheap Solution to Your Dead Sony iLink (Firewire) Port


A couple of years ago (almost to the day) I purchased a Sony Hnadycam (DCR-HC48) mini-dv camera. This camera has served me well on the few occasions I have used it. One thing about this cam that I never liked was that it has a Sony Handycam Station (DCRA-C155) and this is required to connect the camera to a computer for video import. A few weeks ago, I decided that it was time to import some video that I had captured over the Holidays.

To make a long story short it seems my iLink (firewire) port no longer works. When I began googling for a possible solution I found that this is pretty typical of Sony Handycams. I was quoted $130+shipping for repair by a cam repair center. I have seen the Handycam stations sell for around $35 on eBay, however I’m not sure if this is faulty component. As you can imagine I’m not real keen on dumping any money into a mini-dv cam when HD cams are dropping in price.

While testing the cam ports, on the not so handy Handycam Station, I discovered that the USB and RCA ports still work. While I was able to get USB streaming working Windows 7, the video quality (frame rate and resolution) was greatly reduced. I then began searching for a video capture card on eBay as I have seen old PCI cards sell for next to nothing many times in the past. This is when I came across the Easycap USB 2.0 video input device. The total purchase price, shipping and all, was around $12. I figured for that price I really couldn’t go wrong, so I hit the ‘Buy it Now’ button.

Easycap USB 2.0

So far this has been a pretty decent work around for the bad firewire port that seems to be quite common on the Sony Handycams. I don’t like how the audio imports using the Easycap USB 2.0, so I use an RC to 1\8″ adapter and capture the audio through the microphone port. This is a great way to get a clean video signal to your computer without purchasing a video capture card. This USB adapter has RC inputs as well as an S-Video input. I have used it with my DVD player as well as my Dish network receiver.


The Easycap USB 2.0 provides a great way to capture video from almost any source. This device also came with a free version of Ulead Video Editing Software, which really isn’t that bad. There was a USB extender cable as well, but I’m not a big fan of these cables for this type of thing so I’ve never tried it. For $12 you simply can’t go wrong, you can rip DVD’s or capture a flick you rented on Dish Network. These things are being sold all over the place, I happened to get mine on eBay, but the price was pretty comparable on Amazon, Tiger Direct and CDW as well.

Bookmark and Share:

5 Comments

  1. David Lambert:

    I don’t fully understand how this device can replace the functionality of the Firewire port on my Sony Handycam. Mine, like your’s simply will not pick up by my computer. I can’t even see it listed as an unknown device in the device manager. I’ve tried XP, Vista and Windows 7, so I think it’s toast. I can however use the audio\video cable that came with it, displaying video on my TV. How do I capture the video using this Easycap device on my computer? Is the quality and frame rate just as good as the Sony iLink connection? If this really works I will be very happy as I have spent hours trying to get this camera to work and really don’t want to disk out another $400 for another. BTW I too have spent hours reading forums about Sony Handycam ports and how they can burn out. Only use 4 pin to 4 pin cable? Always plug it in before starting your computer and never plug or unplug it when the computer is on? Does this sound right to you? I mean we are in the age of hot swap peripherals aren’t we? Sony has a junk product and that’s the bottom line!

    Any help you could offer would be great, I have 4 hours of Christmas and New Years video and I’m almost at the point of breaking out the VHS tapes.

    Dave

  2. Mark:

    The USB capture device shows up as a video source in your software. It’s not quite the same as using the firewire as the source in that you don’t have control of the camera playback operation. Like I said in the article, this is a good inexpensive solution if you’re holding out and want to get a little more use out of your broken cam. I’m not going to buy another mini-dv camera and I probably won’t purchase another Sony. Adobe Premier does not recognize this USB device so I actually capture the video in AVI format using the software that came with it and then bring it into Adobe for editing.

    I hope this helps.

    Mark

  3. Pro Guitar Backing | EasyGuitarTab.net:

    [...] Ultra Technology Solutions – » Blog Archive » Easycap USB 2.0 is a Cheap Solution to You… [...]

  4. Laundry Bag ยท:

    mini dv is a good way to store video information but flash cards are getting bigger in capacity too “

  5. diet to go promotional codes:

    This is like my second time visiting your homepage. I always like the content and the way you write. Very smooth and instructive at the same time .

Leave a comment